Skip to content

Loading TileBatch controls…

Tile Layout Studio.

Give every edge a plan.

Compare tile orientations, record the joints and
share a practical cut list before you order.

Kitchen floor · layout workspace

Stack bond · corner anchored · actual tile sizes · no offcut reuse

15 full tiles +9 cut pieces =24 blanks in this plan.

Cut pieces:5 ×(58.1 ×30),3 ×(60 ×27.5),1 ×(58.1 ×27.5) cm.

Blue outlines: full tiles. Terracotta outlines: cuts. All tiles are the same product.

Layout blanks2415 full +9 cuts
With10% extra2724 ×1.10 →27
Whole boxes48 tiles per box
Purchased tiles325 above planned27

Entered gaps are geometry assumptions, not installation advice. No global optimum is claimed.

Before you order

Tape measure

Measure actual tile

Check the tile face dimensions,
not just its nominal name.

Cut blue and terracotta tile pieces

Review edge cuts

Review cut sizes and joints
with your installer.

Open carton of blue and cream tiles

Confirm box contents

Check one product’s packing;
allowance is a separate choice.

Questions, Answered.

Is this the fewest tiles possible?

No. This is one corner-anchored stack-bond plan with no offcut reuse.
An installer may choose another layout or reuse cuts. No optimum is claimed.

What grout joint should I use?

Enter the gap for your actual tile and installation plan, confirmed with the product and installer. This tool does not recommend a joint width.

Can I change the tile orientation?

Yes. Compare either entered dimension horizontally. Counts and cut sizes update from the selected arrangement.

Can I reuse cut pieces?

This conservative plan allocates one blank tile per piece. Discuss reuse, obstacles and a final installation layout with your installer.